manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 1007

The ELS(n)B:ELS(n)A bits select the edge that is captured by channel (n), and ELS(n
+1)B:ELS(n+1)A bits select the edge that is captured by channel (n+1). If both
ELS(n)B:ELS(n)A and ELS(n+1)B:ELS(n+1)A bits select the same edge, then it is the
period measurement. If these bits select different edges, then it is a pulse width
measurement.

In the Dual Edge Capture mode, only channel (n) input is used and channel (n+1) input is
ignored.

If the selected edge by channel (n) bits is detected at channel (n) input, then CH(n)F bit is
set and the channel (n) interrupt is generated (if CH(n)IE = 1). If the selected edge by
channel (n+1) bits is detected at channel (n) input and (CH(n)F = 1), then CH(n+1)F bit is
set and the channel (n+1) interrupt is generated (if CH(n+1)IE = 1).

The C(n)V register stores the value of FTM counter when the selected edge by channel
(n) is detected at channel (n) input. The C(n+1)V register stores the value of FTM
counter when the selected edge by channel (n+1) is detected at channel (n) input.

In this mode, a coherency mechanism ensures coherent data when the C(n)V and C(n
+1)V registers are read. The only requirement is that C(n)V must be read before C(n
+1)V.

Note

• The CH(n)F, CH(n)IE, MS(n)A, ELS(n)B, and ELS(n)A

bits are channel (n) bits.

• The CH(n+1)F, CH(n+1)IE, MS(n+1)A, ELS(n+1)B, and

ELS(n+1)A bits are channel (n+1) bits.

• The Dual Edge Capture mode must be used with

ELS(n)B:ELS(n)A = 0:1 or 1:0, ELS(n+1)B:ELS(n+1)A =
0:1 or 1:0 and the FTM counter in 

Free running counter

.

39.5.24.1 One-Shot Capture mode

The One-Shot Capture mode is selected when (DECAPEN = 1), and (MS(n)A = 0). In
this capture mode, only one pair of edges at the channel (n) input is captured. The
ELS(n)B:ELS(n)A bits select the first edge to be captured, and ELS(n+1)B:ELS(n+1)A
bits select the second edge to be captured.

The edge captures are enabled while DECAP bit is set. For each new measurement in
One-Shot Capture mode, first the CH(n)F and CH(n+1) bits must be cleared, and then the
DECAP bit must be set.

Chapter 39 FlexTimer Module (FTM)

KV4x Reference Manual, Rev. 2, 02/2015

Freescale Semiconductor, Inc.

Preliminary

1007

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands