manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 1286

UARTx_C5 field descriptions (continued)

Field

Description

0

If C2[TIE] is set and the S1[TDRE] flag is set, the TDRE interrupt request signal is asserted to request
interrupt service.

1

If C2[TIE] is set and the S1[TDRE] flag is set, the TDRE DMA request signal is asserted to request a
DMA transfer.

6

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

5

RDMAS

Receiver Full DMA Select

Configures the receiver data register full flag, S1[RDRF], to generate interrupt or DMA requests if C2[RIE]
is set.

NOTE: If C2[RIE] is cleared, and S1[RDRF] is set, the RDRF DMA and RDFR interrupt request signals

are not asserted, regardless of the state of RDMAS.

0

If C2[RIE] and S1[RDRF] are set, the RDFR interrupt request signal is asserted to request an interrupt
service.

1

If C2[RIE] and S1[RDRF] are set, the RDRF DMA request signal is asserted to request a DMA
transfer.

4

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

3

LBKDDMAS

LIN Break Detect DMA Select Bit

Configures the LIN break detect flag, S2[LBKDIF], to generate interrupt or DMA requests if BDH[LBKDIE]
is set.

NOTE: If BDH[LBKDIE] is cleared, and S2[LBKDIF] is set, the LBKDIF DMA and LBKDIF interrupt

signals are not asserted, regardless of the state of LBKDDMAS.

0

If BDH[LBKDIE] and S2[LBKDIF] are set, the LBKDIF interrupt signal is asserted to request an
interrupt service.

1

If BDH[LBKDIE] and S2[LBKDIF] are set, the LBKDIF DMA request signal is asserted to request a
DMA transfer.

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

46.4.13 UART Extended Data Register (UARTx_ED)

This register contains additional information flags that are stored with a received
dataword. This register may be read at any time but contains valid data only if there is a
dataword in the receive FIFO.

NOTE

• The data contained in this register represents additional

information regarding the conditions on which a dataword
was received. The importance of this data varies with the
application, and in some cases maybe completely optional.

Memory map and registers

KV4x Reference Manual, Rev. 2, 02/2015

1286

Preliminary

Freescale Semiconductor, Inc.

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands