manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 1114

CANx_CTRL2 field descriptions (continued)

Field

Description

0

Matching starts from Rx FIFO and continues on Mailboxes.

1

Matching starts from Mailboxes and continues on Rx FIFO.

17

RRS

Remote Request Storing

If this bit is asserted Remote Request Frame is submitted to a matching process and stored in the
corresponding Message Buffer in the same fashion of a Data Frame. No automatic Remote Response
Frame will be generated.

If this bit is negated the Remote Request Frame is submitted to a matching process and an automatic
Remote Response Frame is generated if a Message Buffer with CODE=0b1010 is found with the same ID.

This bit can be written only in Freeze mode because it is blocked by hardware in other modes.

0

Remote Response Frame is generated.

1

Remote Request Frame is stored.

16

EACEN

Entire Frame Arbitration Field Comparison Enable For Rx Mailboxes

This bit controls the comparison of IDE and RTR bits within Rx Mailboxes filters with their corresponding
bits in the incoming frame by the matching process. This bit does not affect matching for Rx FIFO. This bit
can be written only in Freeze mode because it is blocked by hardware in other modes.

0

Rx Mailbox filter’s IDE bit is always compared and RTR is never compared despite mask bits.

1

Enables the comparison of both Rx Mailbox filter’s IDE and RTR bit with their corresponding bits
within the incoming frame. Mask bits do apply.

15

Reserved

This field is reserved.

14

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

13

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

12

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

11

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

Memory map/register definition

KV4x Reference Manual, Rev. 2, 02/2015

1114

Preliminary

Freescale Semiconductor, Inc.

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands