NXP Semiconductors freescale KV4 Series, Reference Manual

Page: 1333 / 1359

47.3.4 Port Toggle Output Register (GPIOx_PTOR)
Address: Base a Ch offset
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
W
PTTO
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GPIOx_PTOR field descriptions
Field Description
PTTO Port Toggle Output
Writing to this register will update the contents of the corresponding bit in the PDOR as follows:
0 Corresponding bit in PDORn does not change.
1 Corresponding bit in PDORn is set to the inverse of its existing logic state.
47.3.5 Port Data Input Register (GPIOx_PDIR)
NOTE
Do not modify pin configuration registers associated with pins
not available in your selected package. All unbonded pins not
available in your package will default to DISABLE state for
lowest power consumption.
Address: Base a 10h offset
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
PDI
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GPIOx_PDIR field descriptions
Field Description
PDI Port Data Input
Reads 0 at the unimplemented pins for a particular device. Pins that are not configured for a digital
function read 0. If the Port Control and Interrupt module is disabled, then the corresponding bit in PDIR
does not update.
0 Pin logic level is logic 0, or is not configured for use by digital function.
1 Pin logic level is logic 1.
Chapter 47 General-Purpose Input/Output (GPIO)
KV4x Reference Manual, Rev. 2, 02/2015
Freescale Semiconductor, Inc.
Preliminary
1333