manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 1096

CANx_CTRL1 field descriptions (continued)

Field

Description

0

Automatic recovering from Bus Off state enabled.

1

Automatic recovering from Bus Off state disabled.

5

TSYN

Timer Sync

This bit enables a mechanism that resets the free-running timer each time a message is received in
Message Buffer 0. This feature provides means to synchronize multiple FlexCAN stations with a special
“SYNC” message, that is, global network time. If the RFEN bit in CAN_MCR is set (Rx FIFO enabled), the
first available Mailbox, according to CAN_CTRL2[RFFN] setting, is used for timer synchronization instead
of MB0. This bit can be written in Freeze mode only because it is blocked by hardware in other modes.

0

Timer Sync feature disabled

1

Timer Sync feature enabled

4

LBUF

Lowest Buffer Transmitted First

This bit defines the ordering mechanism for Message Buffer transmission. When asserted, the
CAN_MCR[LPRIOEN] bit does not affect the priority arbitration. This bit can be written in Freeze mode
only because it is blocked by hardware in other modes.

0

Buffer with highest priority is transmitted first.

1

Lowest number buffer is transmitted first.

3

LOM

Listen-Only Mode

This bit configures FlexCAN to operate in Listen-Only mode. In this mode, transmission is disabled, all
error counters described in CAN_ECR register are frozen and the module operates in a CAN Error
Passive mode. Only messages acknowledged by another CAN station will be received. If FlexCAN detects
a message that has not been acknowledged, it will flag a BIT0 error without changing the receive error
counter (RXERRCNT) in CAN_ECR register, as if it was trying to acknowledge the message.

Listen-Only mode is acknowledged by the state of CAN_ESR1[FLTCONF] field indicating Passive Error.
There can be some delay between the Listen-Only mode request and acknowledge.

This bit can be written in Freeze mode only because it is blocked by hardware in other modes.

0

Listen-Only mode is deactivated.

1

FlexCAN module operates in Listen-Only mode.

PROPSEG

Propagation Segment

This 3-bit field defines the length of the Propagation Segment in the bit time. The valid programmable
values are 0–7. This field can be written only in Freeze mode because it is blocked by hardware in other
modes.

Propagation Segment Time = (P 1) × Time-Quanta.

Time-Quantum = one Sclock period.

43.4.4 Free Running Timer (CANx_TIMER)

This register represents a 16-bit free running counter that can be read and written by the
CPU. The timer starts from 0x0 after Reset, counts linearly to 0xFFFF, and wraps around.

Memory map/register definition

KV4x Reference Manual, Rev. 2, 02/2015

1096

Preliminary

Freescale Semiconductor, Inc.

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands