mori seiki MSX-850, User Manual

Page: 806 / 817

INDEX
Page Page
G
G Code List 2-94
G FUNCTIONS 2-94
G00 Positioning the Cutting Tool at
a Rapid Traverse Rate
2-99
G01 Chamfering and Rounding Functions 2-102
G01 Line at Angle Command 2-105
G01 Moving the Cutting Tool along a
Straight Path at a Cutting Feedrate
2-101
G02, G03 Helical Interpolation 2-109
G02, G03 Moving the Cutting Tool along Arcs
at a Cutting Feedrate
2-107
G04 Suspending Program Execution (Dwell) 2-112
G07.1 (G107) Cylindrical Interpolation 2-114
G12.1 (G112), G13.1 (G113) Notching
(Polar Coordinate Interpolation)
2-118
G17, G18, G19 Selecting Plane for Machining 2-121
G22 Stored Stroke Check Function ON 2-122
G22, G23 Setting Barrier to Define
the Tool Entry Prohibition Zone
2-122
G23 Stored Stroke Check Function OFF 2-122
G28 Returning the Axes to Machine
Zero Automatically
2-124
G32 Tapping (at the Center of Spindle) 2-142
G32, G92 Thread Cutting (Continuous Thread
Cutting and Thread Cutting Cycle)
2-126
G38 Workpiece Pushing Check 2-461
G40 Tool Nose Radius Offset Cancel/
Cutter Radius Offset Cancel
2-258
G41 Tool Nose Radius Offset, Left/
Cutter Radius Offset, Left
2-257
G42 Tool Nose Radius Offset, Right/
Cutter Radius Offset, Right
2-257
G50, G96 Setting Maximum and Minimum Spindle
Speeds and Controlling Constant Surface Speed
2-145
G53 Selecting the Machine Coordinate System 2-148
G54 to G59 Selectin Work Coordinate System 2-150
G65 Macro Call (One-Shot) 2-153
G66 Macro Modal Call (Every Axis Travel Command),
G66.1 Macro Modal Call (Every Block),
G67 Macro Modal Call Cancel
2-156
G70 Calls the Finishing Cycle 2-342
G73 Calls the Closed-Loop Cutting Cycle 2-335
G74 Face Cut-Off, Grooving Cycle
and Deep Hole Drilling Cycle
G75 O.D./I.D. Grooving Cycle, Cut-Off Cycle
2-344
G76 Multiple Thread Cutting Cycle 2-351
G84 Synchronized Tapping Cycle
(at the Center of Spindle)
2-399
M90 Simultaneous Spindle/
Rotary Tool Spindle Operation Mode ON
M91 Simultaneous Spindle/
Rotary Tool Spindle Operation Mode OFF
M290 Simultaneous Spindle 2/
Rotary Tool Spindle Operation Mode ON
M291 Simultaneous Spindle 2/
Rotary Tool Spindle Operation Mode OFF
2-222
G97 Controlling Spindle Speed at Constant Speed 2-160
G98, G99 Setting Feedrate Units 2-162
G313 Calling the load monitor macro program 2-447
G325 Change of Value Set for Tailstock
(Digital Tailstock)
2-164
G330 Tailstock (Digital Tailstock)/
Headstock 2 Reference Point Return
2-165
G374 Drilling with Tailstock (Option) 2-166
G479 Automatic Centering Type Steady Rest/
Tailstock
2-167
General 2-256
,
2-287
,
2-443
General Cautions on the Automatic Tool Nose
Radius Offset Function
2-269
General Cautions on the Offset Function 2-320
General Views 1-1
Groove Width Tool Offset Function (Option) 2-182
Groove Width Tool Offset Function (Option)
(Compatible Specifications with Seicos)
2-182
Groove Width Tool Offset Mode 2-183
Groove Width Tool Offset Mode
(Compatible Specifications with Seicos)
2-183
Groove Width Tool Offset Mode Cancel 2-184
Groove Width Tool Offset Mode Cancel
(Compatible Specifications with Seicos)
2-184
Grooving 2-426
Group Registration 2-438
Group Registration of Program Numbers 2-84
Group Specification 2-440
H
Handle Feed Operation 2-24
<<Handle Interruption Screen>> 2-41
Handle Switches 2-23
Headstock 2 Center Adjustment 2-613
For the G codes not described here, refer to the instruction manuals prepared by the NC manufacturer.