H3C SOHO IE4300, Command Reference Manual

Page: 352 / 3296

23
IMPORTANT:
Fiber ports do not support this command.
Use
eee enable
to enable Energy Efficient Ethernet (EEE) on an interface.
Use
undo eee enable
to disable EEE on an interface.
Syntax
eee enable
undo eee enable
Default
EEE is disabled.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
With EEE enabled, a link-up interface enters low power state if it has not received any packet for a
period of time. The time period depends on the chip specifications and is not configurable. When a
packet arrives later, the interface restores to the normal state.
Examples
# Enable EEE on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] eee enable
flow-control
Use
flow-control
to enable TxRx-mode generic flow control on an Ethernet interface.
Use
undo flow-control
to disable TxRx-mode generic flow control on the Ethernet interface.
Syntax
flow-control
undo flow-control
Default
TxRx-mode generic flow control is disabled on an Ethernet interface.
Views
Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
With TxRx-mode generic flow control configured, an interface can both send and receive flow control
frames: