H3C SOHO IE4300, Command Reference Manual

Page: 1282 / 3296

81
Usage guidelines
When the number of LSAs in the LSDB exceeds the upper limit, the LSDB is in an overflow state. In
this state, OSPF does not receive any external LSAs and deletes the external LSAs generated by
itself to save system resources.
You can configure the interval that OSPF exits overflow state. An interval of 0 indicates that the timer
is not started and OSPF does not exit overflow state.
Examples
# Set the OSPF exit overflow interval to 10 seconds.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] lsdb-overflow-interval 10
lsdb-overflow-limit
Use
lsdb-overflow-limit
to set the upper limit of external LSAs in the LSDB.
Use
undo lsdb-overflow-limit
to restore the default.
Syntax
lsdb-overflow-limit number
undo lsdb-overflow-limit
Default
The number of external LSAs is not limited.
Views
OSPF view
Predefined user roles
network-admin
Parameters
number : Specifies the upper limit of external LSAs in the LSDB, in the range of 1 to 1000000.
Examples
# Set the upper limit of external LSAs to 400000.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] lsdb-overflow-limit 400000
network (OSPF area view)
Use
network
to enable OSPF on the interface attached to the specified network in the area.
Use
undo network
to disable OSPF for the interface attached to the specified network in the area.
Syntax
network ip-address wildcard-mask
undo network ip-address wildcard-mask
Default
OSPF is not enabled for any interface.