H3C SOHO IE4300, Command Reference Manual

Page: 153 / 3296

39
TFTP commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see
Security Configuration Guide .
TFTP is not supported in FIPS mode.
tftp
Use
tftp
to download a file from a TFTP server or upload a file to a TFTP server in an IPv4 network.
Syntax
tftp tftp-server { get | put | sget } source-filename
[ destination-filename ] [ vpn-instance vpn-instance-name ] [ dscp
dscp-value | source { interface interface-type interface-number | ip
source-ip-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
tftp-server
: Specifies the IPv4 address or host name of a TFTP server. The host name can be a
case-insensitive string of 1 to 253 characters and can contain only letters, digits, hyphens (-),
underscores (_), and dots (.).
get
: Downloads a file and writes the file directly to the destination folder. If the destination folder
already has a file with the same name, the system deletes the existing file before starting the
download operation. The existing file is permanently deleted even if the download operation fails.
put : Uploads a file.
sget
: Downloads a file and saves the file to memory before writing it to the destination folder. The
system starts to write the file to the destination folder only after the file is downloaded and saved to
memory successfully. If the destination folder already has a file with the same name, the system
overwrites the existing file. If the download or save-to-memory operation fails, the existing file in the
destination folder is not overwritten.
source-filename
: Specifies the source file name, a case-insensitive string of 1 to 1 to 255
characters.
destination-filename
: Specifies the destination file name, a case-insensitive string of 1 to
255 characters. If this argument is not specified, the file uses the source file name.
vpn-instance vpn-instance-name
: Specifies the MPLS L3VPN instance to which the TFTP
server belongs. The
vpn-instance-name
argument represents the VPN instance name, a
case-sensitive string of 1 to 31 characters. If the TFTP server belongs to the public network, do not
specify this option.
dscp dscp-value
: Specifies the DSCP value for IPv4 to use for outgoing TFTP packets to
indicate the packet transmission priority. The value range is 0 to 63. The default is 0.
source { interface interface-type interface-number | ip
source-ip-address }
: Specifies the source address for outgoing TFTP packets. If you do not
specify this option, the device uses the primary IPv4 address of the output interface for the route to
the TFTP server as the source address.