17
Parameters
instance-id
: Specifies an OpenFlow instance by its ID in the range of 1 to 4094. If you do not
specify an instance ID, this command displays detailed information about all OpenFlow instances.
Examples
# Display detailed information about all OpenFlow instances.
<Sysname> display openflow instance
Instance 100 information:
Configuration information:
Description : test-desc
Active status : Active
Inactive configuration:
None
Active configuration:
Classification: VLAN, loosen mode, total VLANs(1)
2
In-band management VLAN, total VLANs(0)
Empty VLAN
Connect mode: Multiple
MAC address learning: Disabled
TCP DSCP value: 10
Flow table:
Table ID(type): 0(MAC-IP), count: 0
Flow-entry max-limit: 65535
Datapath ID: 0x0000001234567891
Default table-miss: Drop
Forbidden port: None
Qinq Network: Disabled
TCP connection backup: Enabled
Port information:
GigabitEthernet1/0/3
Active channel information:
Controller 1 IP address: 192.168.49.49 port: 6633
Controller 2 IP address: 192.168.43.49 port: 6633
…
Table 8 Command output
Field
Description
Configuration information
Information about the configuration.
Description
Description of the OpenFlow instance.
Active status
OpenFlow instance status:
Active
or
Inactive
.
Inactive configuration
Inactive configuration for the OpenFlow instance.
Active configuration
Active configuration for the OpenFlow instance.
Classification: VLAN, total
VLANs
VLANs that are associated with the OpenFlow instance and the total
number of these VLANs.
Summary of Contents for SOHO IE4300
