H3C SOHO IE4300, Command Reference Manual

Page: 1419 / 3296

50
Default
No IPsec profile is applied to an area.
Views
OSPFv3 area view
Predefined user roles
network-admin
Parameters
profile-name
: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63
characters.
Usage guidelines
To protect routing information and prevent attacks, OSPFv3 can authenticate protocol packets by
using an IPsec profile. For more information about IPsec profiles, see
Security Configuration Guide .
Examples
# Apply IPsec profile profile001 to Area 0 in OSPFv3 process 1.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 0
[Sysname-ospfv3-1-area-0.0.0.0] enable ipsec-profile profile001
event-log
Use
event-log
to set the maximum number of OSPFv3 logs.
Use
undo event-log
to remove the configuration.
Syntax
event-log { lsa-flush | peer | spf } size count
undo event-log { lsa-flush | peer | spf } size
Default
The maximum number of LSA aging logs, neighbor logs, or route calculation logs is 10.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
lsa-flush : Specifies the maximum number of LSA aging logs.
peer
: Specifies the maximum number of neighbor logs.
spf
: Specifies the maximum number of route calculation logs.
size count
: Specifies the maximum number of OSPFv3 logs, in the range of 0 to 65535.
Examples
# Set the maximum number of route calculation logs to 50 in OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100