8
Usage guidelines
You can assign only Layer 2 Ethernet interfaces or Layer 2 aggregate interfaces as user ports to an
IPv6 multicast VLAN. Additionally, you can assign a port to only one IPv6 multicast VLAN.
For ports to be assigned to an IPv6 multicast VLAN, you must enable MLD snooping for the VLANs
to which the ports belong.
Examples
# Assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5 as user ports to IPv6 multicast VLAN
100.
<Sysname> system-view
[Sysname] ipv6 multicast-vlan 100
[Sysname-ipv6-mvlan-100] port gigabitethernet 1/0/1 to gigabitethernet 1/0/5
reset ipv6 multicast-vlan group
Use
reset ipv6 multicast-vlan group
to clear IPv6 multicast group entries in IPv6
multicast VLANs.
Syntax
reset
ipv6 multicast-vlan
group
[
ipv6-group-address
[
prefix-length
]
|
ipv6-source-address
[
prefix-length
]
|
vlan
vlan-id
]
*
Views
User view
Predefined user roles
network-admin
Parameters
ipv6-group-address
: Specifies an IPv6 multicast group address. The value range for this
argument is FFxy::/16 (excluding FFx1::/16 and FFx2::/16), where "x" and "y" represent any
hexadecimal numbers in the range of 0 to F. If you do not specify an IPv6 multicast group, this
command clears all IPv6 multicast group entries in IPv6 multicast VLANs.
prefix-length
: Specifies a prefix length of the IPv6 multicast group address. The value range is
8 to 128 and the default value is 128.
ipv6-source-address
: Specifies an IPv6 multicast source by its IPv6 address. If you do not
specify an IPv6 multicast source, this command clears IPv6 multicast group entries for all IPv6
multicast sources in IPv6 multicast VLANs.
prefix-length
: Specifies a prefix length of the IPv6 multicast source address. The value range is
0 to 128 and the default value is 128.
vlan
vlan-id
: Specifies an IPv6 multicast VLAN by its VLAN ID in the range of 1 to 4094. If you do
not specify an IPv6 multicast VLAN, this command clears IPv6 multicast group entries for all IPv6
multicast VLANs.
Examples
# Clear all IPv6 multicast group entries for all IPv6 multicast VLANs.
<Sysname> reset ipv6 multicast-vlan group
Related commands
display ipv6 multicast-vlan group
Summary of Contents for SOHO IE4300
