37
Syntax
summary
undo summary
Default
Automatic RIPv2 route summarization is enabled.
Views
RIP view
Predefined user roles
network-admin
Usage guidelines
Automatic RIPv2 route summarization can reduce the routing table size to enhance the scalability
and efficiency for large networks.
Examples
# Disable automatic RIPv2 route summarization.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] undo summary
Related commands
rip summary-address
rip version
timer triggered
Use
timer triggered
to set the interval for sending triggered updates.
Use
undo timer triggered
to restore the default.
Syntax
timer triggered
maximum-interval
[
minimum-interval
[
incremental-interval
]
]
undo timer triggered
Default
The maximum interval is 5 seconds, the minimum interval is 50 milliseconds, and the incremental
interval is 200 milliseconds.
Views
RIP view
Predefined user roles
network-admin
Parameters
maximum-interval
: Specifies the maximum interval in the range of 1 to 5 seconds.
minimum-interval
: Specifies the minimum interval in the range of 10 to 5000 milliseconds.
incremental-interval
: Specifies the incremental interval in the range of 100 to 1000
milliseconds.
Summary of Contents for SOHO IE4300
