H3C SOHO IE4300, Command Reference Manual

Page: 2073 / 3296

45
Use
undo user log enable
to disable logging for portal user logins and logouts.
Syntax
portal log enable
undo portal log enable
Default
Portal user login and logout logging is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This feature logs information about portal user login and logout events, including the username, IP
address, user's MAC address, interface name, VLAN, and reason for login failure. For portal log
messages to be sent correctly, you must also configure the information center on the device. For
more information about information center configuration, see
Network Management and Monitoring
Configuration Guide .
Examples
# Enable logging for portal user logins and logouts.
<Sysname> system-view
[Sysname] portal user log enable
portal max-user
Use portal max-user to set the maximum number of total portal users allowed in the system.
Use
undo portal max-user
to restore the default.
Syntax
portal max-user max-number
undo portal max-user
Default
The total number of portal users allowed in the system is not limited.
Views
System view
Predefined user roles
network-admin
Parameters
max-number
: Specifies the maximum number of total portal users in the system. The value range
for this argument is 1 to 4294967295.
Usage guidelines
If you configure the maximum total number smaller than the number of current online portal users on
the device, this command still takes effect. The online users are not affected by this command, but
the system forbids new portal users to log in.
This command sets the maximum number of online IPv4 and IPv6 portal users in all.