33
Syntax
lldp ignore-pvid-inconsistency
undo lldp ignore-pvid-inconsistency
Default
LLDP PVID inconsistency check is enabled.
Views
System view
Default command level
network-admin
Usage guidelines
By default, when the system receives an LLDP packet, it compares the PVID value contained in
packet with the PVID configured on the receiving interface. If the two PVIDs do not match, a log
message will be printed to notify the user.
You can disable PVID inconsistency check if different PVIDs are required on a link.
Examples
# Disable LLDP PVID inconsistency check.
<Sysname> system-view
[Sysname] lldp ignore-pvid-inconsistency
lldp local-information all-interface
Use
lldp local-information all-interface
to enable displaying LLDP local information
about all interfaces.
Use
undo lldp local-information all-interface
to disable displaying LLDP local
information about interfaces not in physically up state.
Syntax
lldp local-information all-interface
undo lldp local-information all-interface
Default
The
display lldp local-information
command displays information about physically up
interfaces.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables the
display lldp local-information
command to display LLDP
local information about all interfaces.
By default, the
display lldp local-information
command displays information about
physically up interfaces. The media devices from some vendors can obtain interface information
from H3C devices only through LLDP. For the media devices to obtain all interface information,
Summary of Contents for SOHO IE4300
