75
Views
System view
Predefined user roles
network-admin
Parameters
eap-profile-name
: Specifies the EAP profile name, a case-sensitive string of 1 to 32 characters.
Usage guidelines
An EAP profile is a collection of EAP authentication settings, including the EAP authentication
method and the CA certificate file to be used for some EAP authentication methods. You can use an
EAP profile in a test profile for RADIUS server status detection.
You can specify an EAP profile in multiple test profiles.
You can configure a maximum of 16 EAP profiles.
Examples
# Create an EAP profile named
eap1
and enter its view.
<Sysname> system-view
[Sysname] eap-profile eap1
[Sysname-eap-profile-eap1]
Related commands
radius-server test-profile
exclude
Use
exclude
to exclude an attribute from RADIUS requests.
Use
undo exclude
to cancel the configuration of excluding an attribute from RADIUS requests.
Syntax
exclude
{
accounting
|
authentication
}
name
attribute-name
undo exclude
{
accounting
|
authentication
}
name
attribute-name
Default
No attributes are configured to be excluded from RADIUS requests.
Views
RADIUS attribute test group view
Predefined user roles
network-admin
Parameters
accounting
: Specifies RADIUS accounting requests.
authentication
: Specifies RADIUS authentication requests.
name
attribute-name
: Specifies a RADIUS attribute by its name, a case-insensitive string of 1
to 63 characters. The specified attribute must be an attribute that RADIUS requests carry by default.
RADIUS authentication requests carry the following attributes by default: Service-Type,
Framed-Protocol, NAS-Identifier, Acct-Session-Id, and NAS-Port-Type. RADIUS accounting
requests carry the following attributes by default: NAS-Identifier, Acct-Delay-Time, Acct-Session-Id,
and Acct-Terminate-Cause.
Summary of Contents for SOHO IE4300
