H3C SOHO IE4300, Command Reference Manual

Page: 1895 / 3296

114
A timer that is too long might temporarily block a reachable server that has recovered from a failure.
This is because the server will remain in blocked state until the timer expires.
Examples
# In RADIUS scheme radius1 , set the quiet timer to 10 minutes for the servers.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer quiet 10
Related commands
display radius scheme
timer realtime-accounting (RADIUS scheme view)
Use timer realtime-accounting to set the real-time accounting interval.
Use
undo timer realtime-accounting
to restore the default.
Syntax
timer realtime-accounting interval [ second ]
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
interval : Specifies the real-time accounting interval in the range of 0 to 71582.
second
: Specifies the measurement unit as second. If you do not specify this keyword, the real-time
accounting interval is measured in minutes.
Usage guidelines
When the real-time accounting interval on the device is not zero, the device sends online user
accounting information to the RADIUS accounting server at the configured interval.
When the real-time accounting interval on the device is zero, the device sends online user
accounting information to the RADIUS accounting server at the real-time accounting interval
configured on the server. If the real-time accounting interval is not configured on the server, the
device does not send online user accounting information.
A short interval helps improve accounting precision but requires many system resources.
Table 10 Recommended real-time accounting intervals
Number of users Real-time accounting interval
1 to 99 3 minutes
100 to 499 6 minutes
500 to 999 12 minutes
1000 or more 15 minutes or longer