H3C SOHO IE4300, Command Reference Manual

Page: 1894 / 3296

113
Field Description
•
Stop-accounting response.
Packet length Total length of the RADIUS packet, in bytes.
Packet ID
ID of the RADIUS packet. This field is used to identity a pair of request
and response packets.
[ attribute-name ( code )] [ length ]
[ value ] [ description ]
Information about a RADIUS attribute:
•
attribute-name —Name of the attribute.
•
code —Code of the attribute.
•
length —Length of the attribute, in bytes.
•
value —Value of the attribute.
•
description —Description of the attribute.
Reply-Message:
The RADIUS server rejected the authentication request and replied a
message.
Test result
Result of the AAA test:
•
Successful —The test has succeeded.
•
Failed —The test has failed. If any request is rejected, the test fails.
Related commands
radius scheme
radius attribute-test-group
timer quiet (RADIUS scheme view)
Use
timer quiet
to set the quiet timer for the servers specified in a RADIUS scheme.
Use undo timer quiet to restore the default.
Syntax
timer quiet minutes
undo timer quiet
Default
The server quiet timer period is 5 minutes in a RADIUS scheme.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
minutes
: Specifies the server quiet period in minutes, in the range of 0 to 255. If you set this
argument to 0, the device does not change the state of the current server for a user when the server
is unreachable. It sends an authentication or accounting request of the user to the next server in
active state. For an authentication or accounting request of a new user, it still tries to send the
request to the current server because the current server is in active state.
Usage guidelines
Make sure the server quiet timer is set correctly.
A timer that is too short might result in frequent authentication or accounting failures. This is because
the device will continue to attempt to communicate with an unreachable server that is in active state.