H3C SOHO IE4300, Command Reference Manual

Page: 2724 / 3296

21
Examples
# Set the authentication mode to simple and the authentication key to Sysname for VRRP group 1
on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 authentication-mode simple plain Sysname
Related commands
display vrrp
vrrp version
vrrp vrid follow
Use
vrrp vrid follow
to configure an IPv4 VRRP group to follow a master group.
Use
undo vrrp vrid follow
to remove the configuration.
Syntax
vrrp vrid virtual-router-id follow name
undo vrrp vrid virtual-router-id follow
Default
An IPv4 VRRP group does not follow a master group.
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id
: Specifies an IPv4 VRRP group by its virtual router ID. The value range for
the
virtual-router-id
argument is 1 to 255.
name
: Specifies a master IPv4 VRRP group by its name, a case-sensitive string of 1 to 20
characters.
Usage guidelines
This command configures an IPv4 VRRP group as a subordinate VRRP group to follow a master
group. A subordinate VRRP group can forward service traffic.
An IPv4 VRRP group cannot be both a master group and a subordinate group.
An IPv4 VRRP group stays in Inactive state if it is configured to follow a nonexistent master VRRP
group.
If an IPv4 VRRP group in Inactive or Initialize state follows a master group that is not in Inactive
state, the state of the VRRP group does not change.
Examples
# Configure IPv4 VRRP group 1 to follow master group abc .
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 follow abc