5
If no cost value is configured for an interface, OSPFv3 computes the interface cost value
automatically.
Examples
# Set the reference bandwidth value to 1000 Mbps.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] bandwidth-reference 1000
default tag
Use
default tag
to set a tag for redistributed routes.
Use
undo default tag
to restore the default.
Syntax
default tag tag
undo default tag
Default
The tag of redistributed routes is 1.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
tag
: Specifies a tag for redistributed routes, in the range of 0 to 4294967295.
Usage guidelines
If you do not set a tag for redistributed routes by using the
default-route-advertise
or
import-route
command, the tag specified by the
default tag
command applies.
Examples
# Set the tag for redistributed routes to 2.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] default tag 2
Related commands
default-route-advertise
(OSPFv3 view)
import-route
default-cost (OSPFv3 area view)
Use
default-cost
to set a cost for the default route advertised to the stub area or NSSA area.
Use
undo default-cost
to restore the default.
Syntax
default-cost cost
Summary of Contents for SOHO IE4300
