49
Syntax
telnet server ipv6 dscp dscp-value
undo telnet server ipv6 dscp
Default
IPv6 uses the DSCP value 48 for Telnet packets sent to a Telnet client.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value
: Specifies a DSCP value in the range of 0 to 63.
Usage guidelines
This command is not supported in FIPS mode.
The DSCP value is carried in the Traffic class field of an IPv6 packet to indicate the packet
transmission priority.
Examples
# Set the DSCP value for IPv6 to use for outgoing Telnet packets to 30 on a Telnet server.
<Sysname> system-view
[Sysname] telnet server ipv6 dscp 30
telnet server ipv6 port
Use
telnet server ipv6 port
to specify the IPv6 Telnet service port number.
Use
undo
telnet server ipv6 port
to restore the default.
Syntax
telnet server ipv6 port port-number
undo telnet server ipv6 port
Default
The IPv6 Telnet service port number is 23.
Views
System view
Predefined user roles
network-admin
Parameters
port-number
: Specifies a port number. The value can be 23 or in the range of 1025 to 65535.
Usage guidelines
This command terminates all existing Telnet connections to the IPv6 Telnet server. To use the Telnet
service, users must reestablish Telnet connections.
Examples
# Set the IPv6 Telnet service port number to 1026.
Summary of Contents for SOHO IE4300
