H3C SOHO IE4300, Command Reference Manual

Page: 3039 / 3296

3
Parameters
source
: Specifies a NETCONF operation source that represents clients that use a protocol.
•
all : Specifies NETCONF clients that use all protocols.
•
agent
: Specifies clients that use Telnet, SSH, NETCONF over console, or NETCONF over
SSH.
•
soap : Specifies clients that use SOAP over HTTP, or SOAP over HTTPS.
•
web
: Specifies clients that use Web.
protocol-operation
: Logs requests and replies for specific types of NETCONF operations.
•
all
: Specifies all types of NETCONF operations.
•
action : Specifies the <action> operation.
•
config : Specifies the configuration-related NETCONF operations, including the <CLI>,
<save>, <load>, <rollback>, <lock>, <unlock>, and <save-point> operations.
•
get : Specifies the data retrieval-related NETCONF operations, including the <get>,
<get-config>, <get-bulk>, <get-bulk-config>, and <get-sessions> operations.
•
session : Specifies session-related NETCONF operations, including the <kill-session> and
<close-session> operations, and capability exchanges by hello messages.
•
set : Specifies all <edit-config> operations.
•
syntax : Specifies the requests that include XML and schema errors.
•
others
: Specifies NETCONF operations except for those specified by keywords
action
,
config
,
get
,
set
,
session
, and
syntax
.
row-operation
: Logs row operations for <action> and <edit-config> operations.
verbose : Logs detailed information about requests and replies for types of NETCONF operations,
including packet contents of format-correct requests and error information about failed <edit-config>
operations.
Usage guidelines
If you specify the
protocol-operation
keyword, the device logs each of the matching operation
and the operation result. For example, if you perform a NETCONF operation to create VLANs 3
through 5, the device outputs the following log messages:
%Mar 21 17:11:34:479 2017 Sysname XMLSOAP/6/XML_REQUEST: test from 192.168.100.198,
session id 2,message-id 100, receive edit-config request.
%Mar 21 17:11:34:483 2017 Sysname XMLSOAP/6/EDIT-CONFIG: test from 192.168.100.198,
session id 2,message-id 100, execute success.
If you specify the
row-operation
keyword, the device logs each row operation and the operation
result for an <action> or <edit-config> operation. For example, if you perform a NETCONF operation
to create VLANs 3 through 5, the device outputs the following log messages:
%Mar 31 17:50:02:608 2017 Sysname XMLSOAP/6/EDIT-CONFIG: User (test, 192.168.100.20,
session ID 1), message ID=100, operation=create VLAN/VLANs (ID=3), result=Succeeded. No
attributes.
%Mar 31 17:50:02:609 2017 Sysname XMLSOAP/6/EDIT-CONFIG: User (test, 192.168.100.20,
session ID 1), message ID=100, operation=create VLAN/VLANs (ID=4), result=Succeeded. No
attributes.
%Mar 31 17:50:02:611 2017 Sysname XMLSOAP/6/EDIT-CONFIG: User (test, 192.168.100.20,
session ID 1), message ID=100, operation=create VLAN/VLANs (ID=5), result=Succeeded. No
attributes.
For NETCONF to correctly send the generated logs to the information center, you must also
configure the information center. For information about information center configuration, see
Network Management and Monitoring Configuration Guide .