H3C SOHO IE4300, Command Reference Manual

Page: 2297 / 3296

50
Parameters
tag-value
: Specifies a tag value. The value range is 1 to 4294967295.
Usage guidelines
The tag value set by this command helps in implementing flexible route control through routing
policies.
When you change this tag value in an IPsec policy, the device deletes all IPsec SAs created by this
IPsec policy, and all associated static routes.
Examples
# Set the tag value to 50 for the static routes created by IPsec RRI.
<Sysname>system-view
[Sysname] ipsec policy 1 1 isakmp
[Sysname-ipsec-policy-isakmp-1-1] reverse-route tag 50
Related commands
ipsec policy
ipsec policy-template
sa duration
Use sa duration to set an SA lifetime.
Use
undo sa duration
to remove an SA lifetime.
Syntax
sa duration { time-based seconds | traffic-based kilobytes }
undo sa duration { time-based | traffic-based }
Default
The SA lifetime of an IPsec policy, IPsec policy template, or IPsec profile is the current global SA
lifetime.
Views
IPsec policy view
IPsec policy template view
IPsec profile view
Predefined user roles
network-admin
Parameters
time-based seconds
: Specifies the time-based SA lifetime in the range of 180 to 604800
seconds.
traffic-based kilobytes
: Specifies the traffic-based SA lifetime in the range of 2560 to
4294967295 kilobytes.
Usage guidelines
IKE prefers the SA lifetime of the IPsec policy, IPsec policy template, or IPsec profile over the global
SA lifetime configured by the
ipsec sa global-duration command. If the IPsec policy, IPsec
policy template, or IPsec profile is not configured with the SA lifetime, IKE uses the global SA lifetime
for SA negotiation.