36
ipv6
{
ipv6-address prefix-length
|
any
}
[
tcp
tcp-port-number
|
udp
udp-port-number
]
}
*
[
interface interface-type interface-number
]
undo portal free-rule
{
rule-number
|
all
}
Default
No IP-based portal-free rule is configured.
Views
System view
Predefined user roles
network-admin
Parameters
rule-number
: Specifies a portal-free rule number. The value range for this argument is 0 to
4294967295.
destination
: Specifies the destination information.
source
: Specifies the source information.
ip ipv4-address
: Specifies an IPv4 address for the portal-free rule.
{
mask-length
|
mask
}
: Specifies the subnet mask of the IPv4 address. The value range for the
mask-length
argument is 0 to 32. The
mask
argument is in dotted decimal format.
ipv6
ipv6-address
: Specifies an IPv6 address for the portal-free rule.
prefix-length
: Specifies the prefix length of the IPv6 address, in the range of 0 to 128.
ip any
: Represents any IPv4 address.
ipv6 any
: Represents any IPv6 address.
tcp
tcp-port-number
: Specifies a TCP port number for the portal-free rule, in the range of 0 to
65535.
udp
udp-port-number
: Specifies a UDP port number for the portal-free rule, in the range of 0 to
65535.
all
: Specifies all portal-free rules.
interface
interface-type interface-number
: Specifies a Layer 3 interface on which the
portal-free rule takes effect.
Usage guidelines
You can specify both the
source
and
destination
keyword for a portal-free rule. If you specify
only one keyword, the other keyword does not act as a filtering criterion.
If you specify both a source port number and a destination port number for a portal-free rule, the two
port numbers must belong to the same transport layer protocol.
If you do not specify a Layer 3 interface, the portal-free rule takes effect on all portal-enabled
interfaces.
You cannot configure two portal-free rules with the same filtering criteria.
Examples
# Configure an IPv4-based portal-free rule:
•
Set the rule number to 1.
•
Specify the source IP address as 10.10.10.1/24, the destination IP address as 20.20.20.1, and
the destination TCP port number as 23.
Summary of Contents for SOHO IE4300
