H3C SOHO IE4300, Command Reference Manual

Page: 1187 / 3296

28
rip input
Use
rip input
to enable an interface to receive RIP messages.
Use
undo rip input
to disable an interface from receiving RIP messages.
Syntax
rip input
undo rip input
Default
An interface is enabled to receive RIP messages.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable VLAN-interface 10 from receiving RIP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] undo rip input
rip max-packet-length
Use
rip max-packet-length
to set the maximum length of RIP packets.
Use
undo rip max-packet-length
to restore the default.
Syntax
rip max-packet-length value
undo rip max-packet-length
Default
The maximum length of RIP packets is 512 bytes.
Views
Interface view
Predefined user roles
network-admin
Parameters
value
: Specifies the maximum length of RIP packets, in the range of 32 to 65535 bytes.
Usage guidelines
The supported maximum length of RIP packets varies by vendor. Use this feature with caution to
avoid compatibility issues.
When authentication is enabled, follow these guidelines to ensure packet forwarding:
•
For simple authentication, the maximum length of RIP packets must be no less than 52 bytes.
•
For MD5 authentication (with packet format defined in RFC 2453), the maximum length of RIP
packets must be no less than 56 bytes.