H3C SOHO IE4300, Command Reference Manual

Page: 2963 / 3296

23
[Sysname-GigabitEthernet1/0/1] poe priority critical
# Set the power supply priority of the PI to critical in PoE profile view.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe priority critical
[Sysname-poe-profile-abc-1] quit
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] apply poe-profile name abc
Related commands
poe pd-policy priority
poe reset enable
Use
poe reset enable
to enable PI power cycling upon a system warm reboot.
Use undo poe pse-policy priority to disable PI power cycling upon a system warm reboot.
Syntax
poe reset enable
undo poe reset enable
Default
PI power cycling upon a system warm reboot is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
During the system warm reboot process (upon execution of the
reboot
command), the PIs
continue supplying power to the PDs but data connections between the PDs and the device are
interrupted. After the system reboots, PDs might not re-initiate data connections with the device.
Power cycling PIs upon a system warm reboot allows the PDs to re-establish data connections with
the device.
Examples
# Enable PI power cycling upon a system warm reboot.
<Sysname> system-view
[Sysname] poe reset enable
poe standard
Use
poe standard { at | bt }
to specify a PoE standard.
Use
undo poe standard
to restore the default.
Syntax
poe standard { at | bt }
undo poe standard