36
Field
Description
Options
LSA options:
•
AT
—Whether the Authentication Trailer option is carried
in packets.
•
DC
—The originating router supports OSPFv3 over
on-demand circuits.
•
R
—Whether the originating router is an active router.
•
N
—Whether the originating router supports NSSA LSAs.
•
x
—Reserved.
•
E
—Whether the originating router can receive AS
External LSAs.
•
V6
—Whether the originating router takes part in IPv6
route calculation.
Dead timer due in hh:mm:ss
Remaining time for the dead timer, in hh:mm:ss format. hh
represents the hours, mm represents the minutes, and ss
represents the seconds.
Neighbor is up for hh:mm:ss
Uptime for the neighbor, in hh:mm:ss format. hh represents the
hours, mm represents the minutes, and ss represents the
seconds.
Authentication sequence: (high) 0, (low)
59755
Authentication sequence number carried in the received
packets. The high 32-bit value is 0, and the low 32-bit value is
59755.
Neighbor state change count
Count of neighbor state changes.
Database Summary List
Number of LSAs sent in DD packet.
Link State Request List
Number of LSAs in the link state request list.
Link State Retransmission List
Number of LSAs in the link state retransmission list.
Neighbor interface ID
Interface ID of the neighbor.
GR state
GR state:
•
Normal
—GR is not in progress.
•
Doing GR
—Acting as the GR restarter.
•
Complete GR.
•
Helper
—Acting as the GR helper.
Grace period
Grace-LSA sending interval.
Grace period timer
Grace-LSA sending interval timer.
DD Rxmt Timer
DD packet retransmission timer.
LS Rxmt Timer
LSU retransmission timer.
# Display OSPFv3 neighbor statistics.
<Sysname> display ospfv3 peer statistics
OSPFv3 Process 1 with Router ID 1.1.1.1
-------------------------------------------------------------------------
Area ID Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0.0.0.0 0 0 0 0 0 0 0 1 1
Total 0 0 0 0 0 0 0 1 1
Summary of Contents for SOHO IE4300
