H3C SOHO IE4300, Command Reference Manual

Page: 2944 / 3296

4
Peak Power : 11684 mW
Max Power : 15400 mW
Electric Current : 244 mA
Voltage : 51.7 V
PD Description : IP Phone For Room 101
Legacy PD Detection : Disabled
Table 2 Command output
Field Description
PoE Status
PoE status:
•
Enabled.
•
Disabled.
Power Priority
Power supply priority:
•
Critical (highest).
•
High.
•
Low.
Oper
Operating status:
•
Off —PoE is disabled.
•
On —Power is being supplied to the PI correctly.
•
Power-lack —Remaining guaranteed power is insufficient for a
critical PI.
•
Power-deny —The PSE refuses to supply power. The power
required by the PD is higher than the configured power.
•
Power-itself —The PD is using another power supply.
•
Power-limit —The PSE is supplying power to the PD based on
the configured power though the PD requires more power than
the configured power.
IEEE Class
PD power class by which the PI supplies power to the PD.
If the PI does not support supplying power to the PD, this field displays
a hyphen (-).
Detection Status
Power detection status:
•
Disabled —The PoE function is disabled.
•
Searching —The PI is searching for the PD.
•
Delivering power —The PI is supplying power to the PD.
•
Fault —A fault occurred during the test.
•
Test —The PI is undergoing a test.
•
Other fault —A fault has caused the PSE to enter the idle status.
•
PD disconnected —The PD is disconnected.
Power Mode
Power transmission mode:
•
Signal —Power is transmitted over the signal pairs of a twisted
pair cable.
•
Spare —Power is transmitted over the spare pairs of a twisted
pair cable.
Current Power
Current power, including PD consumption power and transmission
loss.
Average Power Average power.
Peak Power Peak power.
Max Power Maximum power.
Electric Current Current.