26
Predefined user roles
network-admin
Parameters
ipv6-address
: Specifies the IPv6 address of the portal authentication server.
vpn-instance vpn-instance-name
: Specifies the MPLS L3VPN instance to which the portal
authentication server belongs. The
vpn-instance-name
argument represents the VPN instance
name, a case-sensitive string of 1 to 31 characters. If the portal authentication server belongs to the
public network, do not specify this option.
key
: Specifies a shared key for communication with the portal authentication server. Portal packets
exchanged between the access device and the portal authentication server carry an authenticator
that is generated with the shared key. The receiver uses the authenticator to check the correctness
of the received portal packets.
cipher
: Specifies a key in encrypted form.
simple
: Specifies a key in plaintext form. For security purposes, the key in plaintext form will be
stored in encrypted form.
string
: Specifies the key. Its plaintext form is a case-sensitive string of 1 to 64 characters. Its
encrypted form is a case-sensitive string of 1 to 117 characters.
Usage guidelines
A portal authentication server has only one IPv6 address. Therefore in portal authentication server
view, only one IPv6 address exists. If you execute this command multiple times, the most recent
configuration takes effect.
Do not configure the same IPv6 address and MPLS L3VPN for different portal authentication
servers.
Examples
# Specify
2000::1
as the IPv6 address of portal authentication server
pts
and plaintext key
portal
as
the shared key for communication with the portal authentication server.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts] ipv6 2000::1 key simple portal
Related commands
display portal server
portal server
port (portal authentication server view)
Use
port
to set the destination UDP port number used by the device to send unsolicited portal
packets to the portal authentication server.
Use
undo port
to restore the default.
Syntax
port
port-number
undo port
Default
The device uses 50100 as the destination UDP port number for unsolicited portal packets.
Summary of Contents for SOHO IE4300
