24
Use
undo forbidden packet-in arp controller
to restore the default.
Syntax
forbidden packet-in arp controller controller-id-list
undo forbidden packet-in arp controller
[
controller-id-list
]
Default
No controllers to which ARP packets are forbidden to be reported are configured.
Views
OpenFlow instance view
Predefined user roles
network-admin
Parameters
controller-id-list
: Specifies a space-separated list of a maximum of 10 controller items.
Each item specifies a controller ID or a range of controller IDs in the form of
controller-id1
to
controller-id2
. The value range for controller IDs is 0 to 63. The value for the
controller-id2
argument must be equal to or greater than the value for the
controller-id1
argument. If you do not specify the
controller-id-list
argument, the
undo
form of this
command restores all configuration of this feature to the default.
Examples
# Forbid the device not to report ARP packets to controller 0.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] forbidden packet-in arp controller 0
forbidden port
Use
forbidden port
to forbid an OpenFlow instance from reporting ports of the specified types to
controllers.
Use
undo forbidden port
to restore the default.
Syntax
forbidden port
{
l3-physical-interface
|
vlan-interface
|
vsi-interface
}
*
undo forbidden port
Default
No port types are prevented from being reported to the controllers. All ports that belong to an
OpenFlow instance are reported to the controllers.
Views
OpenFlow instance view
Predefined user roles
network-admin
Parameters
l3-physical-interface
: Specifies Layer 3 Ethernet interfaces and Layer 3 aggregate
interfaces that belong to an OpenFlow instance. This field is not supported in the current software
version.
Summary of Contents for SOHO IE4300
