46
Predefined user roles
network-admin
Usage guidelines
Password recovery capability controls console user access to the device configuration and SDRAM
from BootWare menus.
If password recovery capability is enabled, a console user can access the device configuration
without authentication to configure new passwords.
If password recovery capability is disabled, console users must restore the factory-default
configuration before they can configure new passwords. Restoring the factory-default configuration
deletes the next-startup configuration files.
To enhance system security, disable password recovery capability.
Availability of BootWare menu options depends on the password recovery capability setting. For
more information, see the release notes.
Examples
# Disable password recovery capability.
<Sysname> system-view
[Sysname] undo password-recovery enable
reboot
Use
reboot
to reboot the device.
Syntax
reboot
[
slot
slot-number
]
[
force
]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number
: Specifies an IRF member device by its member ID. If you do not specify an
IRF member device, the command reboots all IRF member devices.
force
: Reboots the device immediately without performing software or hard disk check. If this
keyword is not specified, the system first identifies whether the reboot might result in data loss or a
system failure. For example, the system identifies whether the main system software image file
exists and whether a write operation is in progress on a storage medium. If the reboot might cause
problems, the system does not reboot the device.
Usage guidelines
CAUTION:
•
A reboot might interrupt network services.
•
Use the
force
keyword only when the device fails or a
reboot
command without the
force
keyword cannot perform a reboot correctly. A
reboot
command with the
force
keyword might
result in file system corruption because it does not perform data protection.
If the main startup software images are corrupt or missing, you must re-specify a set of main startup
software images before executing the
reboot
command.
Summary of Contents for SOHO IE4300
