H3C SOHO IE4300, Command Reference Manual

Page: 2966 / 3296

26
Usage guidelines
If PSE power usage crosses the threshold multiple times in succession, the system sends
notification messages only for the first crossing. For more information, see "Configuring SNMP."
Examples
# Set the power alarm threshold of PSE 4 to 90%.
<Sysname> system-view
[Sysname] poe utilization-threshold 90 pse 4
poe-profile
Use poe-profile to create a PoE profile and enter its view, or enter the view of an existing PoE
profile.
Use undo poe-profile to delete a PoE profile.
Syntax
poe-profile profile-name [ index ]
undo poe-profile { index index | name profile-name }
Default
No PoE profiles exist.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name
: Specifies a PoE profile name, a case-sensitive string of 1 to 15 characters. A PoE
configuration file name begins with a letter and must not contain reserved keywords including
undo
,
all
,
name
,
interface
,
user
,
poe
,
disable
,
max-power
,
mode
,
priority
, or
enable
.
index : Specifies the index number of a PoE profile, in the range of 1 to 100.
Usage guidelines
To configure PIs in batches, use the PoE profile.
If you do not specify a profile index, the system automatically assigns an index (starting from 1) to
the PoE profile.
If a PoE profile is applied, use the
undo apply poe-profile
command to remove the
application before deleting the PoE profile.
Examples
# Create a PoE profile, name it abc , and specify the index number as 3 .
<Sysname> system-view
[Sysname] poe-profile abc 3
[Sysname-poe-profile-abc-3]
# Create a PoE profile and name it def . Do not specify the index number.
<Sysname> system-view
[Sysname] poe-profile def
[Sysname-poe-profile-def-1]