H3C SOHO IE4300, Command Reference Manual

Page: 2345 / 3296

98
[Sysname-ikev2-profile-profile1] authentication local pre-share
[Sysname-ikev2-profile-profile1] authentication remote rsa-signature
# Specify PKI domain genl as the PKI domain for obtaining certificates.
[Sysname-ikev2-profile-profile1] certificate domain genl
# Specify IKEv2 keychain keychain1 .
[Sysname-ikev2-profile-profile1] keychain keychain1
Related commands
display ikev2 profile
certificate domain
(IKEv2 profile view)
keychain
(IKEv2 profile view)
certificate domain
Use
certificate domain
to specify a PKI domain for signature authentication in IKEv2
negotiation.
Use
undo certificate domain
to remove a PKI domain for signature authentication in IKEv2
negotiation.
Syntax
certificate domain domain-name [ sign | verify ]
undo certificate domain domain-name
Default
PKI domains configured in system view are used for signature authentication.
Views
IKEv2 profile view
Predefined user roles
network-admin
Parameters
domain-name : Specifies a PKI domain by its name, a case-insensitive string of 1 to 31 characters.
sign
: Uses the local certificate in the PKI domain to generate a signature.
verify
: Uses the CA certificate in the PKI domain to verify the remote end's certificate.
Usage guidelines
If you do not specify the sign or verify keyword, the PKI domain is used for both sign and
verify purposes. You can specify a PKI domain for each purpose by executing this command
multiple times. If you specify the same PKI domain for both purposes, the later configuration takes
effect. For example, if you execute
certificate domain abc sign and certificate
domain abc verify
successively, the PKI domain
abc
will be used only for verification.
If the local end uses RSA, DSA, or ECDSA signature authentication, you must specify a PKI domain
for signature generation. If the remote end uses RSA, DSA, or ECDSA signature authentication, you
must specify a PKI domain for verifying the remote end's certificate. If you do not specify PKI
domains, the PKI domains configured in system view will be used.
Examples
# Create an IKEv2 profile named profile1 .
<Sysname> system-view