H3C SOHO IE4300, Command Reference Manual

Page: 1914 / 3296

133
If the specified server resides on an MPLS L3VPN, specify the VPN instance by using the
vpn-instance vpn-instance-name
option. The VPN instance specified by this command
takes precedence over the VPN instance specified for the HWTACACS scheme.
You can remove an authorization server only when it is not used for user authorization. Removing an
authorization server affects only authorization processes that occur after the remove operation.
Examples
# In HWTACACS scheme hwt1 , specify the primary authorization server with IP address
10.163.155.13, TCP port number 49, and plaintext shared key 123456TESTautr&! .
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49 key simple
123456TESTautr&!
Related commands
display hwtacacs scheme
key
(HWTACACS scheme view)
secondary authorization
(HWTACACS scheme view)
vpn-instance (HWTACACS scheme view)
reset hwtacacs statistics
Use
reset hwtacacs statistics
to clear HWTACACS statistics.
Syntax
reset hwtacacs statistics { accounting | all | authentication |
authorization }
Views
User view
Predefined user roles
network-admin
Parameters
accounting
: Clears the HWTACACS accounting statistics.
all
: Clears all HWTACACS statistics.
authentication
: Clears the HWTACACS authentication statistics.
authorization
: Clears the HWTACACS authorization statistics.
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
Related commands
display hwtacacs scheme
reset stop-accounting-buffer (for HWTACACS)
Use reset stop-accounting-buffer to clear buffered HWTACACS stop-accounting
requests to which no responses have been received.