47
Related commands
aaa
nas-id
profile
portal nas-port-id format
Use
portal nas-port-id format
to specify the NAS-Port-Id attribute format.
Use
undo portal nas-port-id format
to restore the default.
Syntax
portal nas-port-id format
{
1
|
2
|
3
|
4
}
undo portal nas-port-id format
Default
The format for the NAS-Port-Id attribute is format 2.
Views
System view
Predefined user roles
network-admin
Parameters
1
: Uses format 1 for the NAS-Port-Id attribute.
2
: Uses format 2 for the NAS-Port-Id attribute.
3
: Uses format 3 for the NAS-Port-Id attribute.
4
: Uses format 4 for the NAS-Port-Id attribute.
Usage guidelines
The NAS-Port-Id format supported by RADIUS servers varies by vendor. Use this command to
specify the format of the NAS-Port-Id attribute in the RADIUS packets sent for portal users to the
RADIUS server. The device then automatically constructs a value for the NAS-Port-Id attribute in the
specified format to meet the RADIUS server requirements.
Format 1 contains three space-separated strings:
interface-type port-location access-node-id
.
Spaces are not allowed within a string.
•
The
interface-type
string specifies the interface type of the NAS port. Available options include:
atm
—ATM interface.
eth
—Common Ethernet interface.
trunk
—Ethernet trunk interface.
0
—The interface type information will be reported by the access node to the BRAS.
•
The
port-location
string represents the location of the access line on the BRAS. Its format is
NAS_slot/NAS_port:XPI.XCI.
Field
Description
NAS_slot
Slot number of the BRAS, in the range of 0 to 31.
NAS_Port
Port number of the BRAS, in the range of 0 to 63.
XPI.XCI
For ATM interfaces:
•
XPI is VPI in the range of 0 to 255.
•
XCI is VCI in the range of 0 to 65535.
Summary of Contents for SOHO IE4300
