H3C SOHO IE4300, Command Reference Manual

Page: 2652 / 3296

8
Field Description
Control VLAN
Control VLANs of the RRPP domain:
•
Primary —Primary control VLAN.
•
Secondary —Secondary control VLAN.
Protected VLAN
MSTIs corresponding to the VLANs protected by the RRPP domain. To view the
VLAN-to-instance mappings, use the
display stp
region-configuration
command (see Layer 2—LAN Switching
Command Reference ).
Hello timer Hello timer value in seconds.
Fail timer Fail timer value in seconds.
Linkup-Delay timer Link-up delay timer value in seconds.
Ring ID RRPP ring ID.
Ring level
RRPP ring level:
•
0 —Primary ring.
•
1 —Subring.
Node mode
Node mode:
•
Master node.
•
Transit node.
•
Edge node.
•
Assistant edge node.
Ring state
RRPP ring state:
•
Possible states on the master node:

Completed —The ring is healthy.

Failed —The ring is not closed.

Unknown —The RRPP domain is disabled.
•
Possible states on a transit node or edge node:

LinkUp —All ports on the node are up.

LinkDown —At least one port on the node is down.

PreForward —A port on the node is blocked.

Unknown —The RRPP domain is disabled.
•
Possible states on an assistant edge node:

LinkUp —All ports on the node are up.

LinkDown —At least one port on the node is down.

PreForward —A port on the node is blocked.

LinkUpNotify —The node does not receive Edge-Hello packets in
LinkUp state.

LinkDnNotify —The node does not receive Edge-Hello packets in
LinkDown state.

PreForwardNotify —The port on the directly connected edge node
comes up, or the assistant edge node does not receive Edge-Hello
packets in PreForward state.

Unknown —The RRPP domain is disabled.
If the ring is not enabled on the device operating as the master node or the device
is not the master node of the ring, a hyphen (-) is displayed.
Enable status
RRPP ring status:
•
Yes —Enabled.
•
No —Disabled.