33
Predefined user roles
network-admin
Parameters
port-number
: Specifies an SNMP listening port by its number in the range of 1 to 65535.
Usage guidelines
The SNMP agent will fail to be enabled when the port that the agent will listen on is used by another
service. You can use the
snmp-agent port
command to change the SNMP listening port. As a
best practice, execute the
display udp verbose
command to view the UDP port use information
before specifying a new SNMP listening port.
After changing the SNMP listening port, the NMS can perform SNMP set and get operations on the
device only after reconnecting the device by using the new port number.
Examples
# Specify
5555
as the SNMP listening port..
<Sysname> system-view
[Sysname] snmp-agent port 5555
Related commands
display udp verbose
(see IP performance optimization commands in
Layer 3—IP Services
Configuration Guide
)
snmp-agent remote
Use
snmp-agent
remote
to set an SNMP engine ID for a remote SNMP entity.
Use
undo
snmp-agent
remote
to delete the SNMP engine ID of a remote SNMP entity.
Syntax
snmp-agent
remote
{
ipv4-address
|
ipv6
ipv6-address
}
[
vpn-instance
vpn-instance-name
]
engineid
engineid
undo
snmp-agent
remote
ip-address
Default
No SNMP engine IDs are configured for remote SNMP entities.
Views
System view
Predefined user roles
network-admin
Parameters
ipv4-address
: Specifies a remote SNMP entity by its IPv4 address.
ipv6
ipv6-address
: Specifies a remote SNMP entity by its IPv6 address.
vpn-instance
vpn-instance-name
: Specifies the MPLS L3VPN instance to which the remote
SNMP entity belongs. The
vpn-instance-name
argument represents the VPN instance name. a
case-sensitive string of 1 to 31 characters. If the SNMP entity belongs to the public network, do not
specify this option.
engineid
: Specifies the SNMP engine ID of the remote SNMP entity. This argument is a
case-insensitive hexadecimal string. Its length is an even number in the range of 10 to 64. All-zero
and all-F strings are invalid.
Summary of Contents for SOHO IE4300
