39
vlan vlan-id
: Specifies a source VLAN ID for the portal-free rule. This option takes effect only on
portal users that access the network through VLAN interfaces.
all
: Specifies all portal-free rules.
Usage guidelines
If you specify both the source VLAN and the source Layer 2 interface, the interface must be in the
VLAN.
Examples
# Configure source-based portal-free rule: specify the rule number as
3
, source MAC address as
1-1-1
, and source VLAN ID as
10
. This rule allows the portal user whose source MAC address is
1-1-1 from VLAN 10 to access network resources without authentication.
<Sysname> system-view
[Sysname] portal free-rule 3 source mac 1-1-1 vlan 10
Related commands
display portal rule
portal ipv6 free-all except destination
Use
portal
ipv6 free-all except destination
to configure an IPv6 portal authentication
destination subnet on an interface.
Use
undo portal
ipv6
free-all except destination
to delete IPv6 portal authentication
destination subnets on the interface.
Syntax
portal
ipv6
free-all except destination
ipv6-network-address
prefix-length
undo portal ipv6 free-all except destination
[
ipv6-network-address
]
Default
No IPv6 portal authentication destination subnet is configured. Portal users must pass portal
authentication to access any IPv6 subnet.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6-network-address
: Specifies an IPv6 portal authentication destination subnet.
prefix-length
: Specifies the prefix length of the IPv6 subnet, in the range of 0 to 128.
Usage guidelines
Portal users on the interface are authenticated when accessing the specified authentication
destination subnet (except IP addresses and subnets specified in portal-free rules). The users can
access other subnets without portal authentication.
You can configure multiple authentication destination subnets.
If you do not specify the
ipv6-network-address
argument in the
undo portal
ipv6
free-all except destination
command, this command deletes all IPv6 portal authentication
destination subnets on the interface.
Summary of Contents for SOHO IE4300
