2
Default
No PoE profile is applied to a PI.
Views
System view
Predefined user roles
network-admin
Parameters
index index
: Specifies a PoE profile by its index number in the range of 1 to 100.
name profile-name
: Specifies a PoE profile by its name, a case-sensitive string of 1 to 15
characters.
interface-range
: Specifies a range of Ethernet interfaces in the form of
interface-type
interface-number
[
to
interface-type interface-number
]
,
where
interface-type
interface-number
represents the interface type and interface number.
The start interface number must be smaller than the end interface number. If an interface in the
specified range does not support PoE, it is ignored when the PoE profile is applied.
Examples
# Apply the PoE profile named
forIPphone
to GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] apply poe-profile name forIPphone interface gigabitethernet 1/0/1
# Apply the PoE profile with index number 1 to PIs GigabitEthernet 1/0/2 to GigabitEthernet 1/0/6.
<Sysname> system-view
[Sysname] apply poe-profile index 1 interface gigabitethernet 1/0/2 to gigabitethernet
1/0/6
Related commands
apply poe-profile
display poe-profile interface
display poe device
Use
display poe device
to display general PSE information.
Syntax
display
poe
device
[
slot
slot-number
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot
slot-number
: Specifies an IRF member device by its member ID. If you do not specify a
member device, the command displays general PSE information about all PSEs in the IRF fabric.
Examples
# Display general PSE information.
Summary of Contents for SOHO IE4300
