10
Views
DHCP policy view
Predefined user roles
network-admin
Parameters
pool-name
: Specifies a DHCP address pool by its name, a case-insensitive string of 1 to 63
characters.
Usage guidelines
In a DHCP policy, the DHCP server uses the default DHCP address pool to assign IP addresses and
other parameters to clients that do not match any user classes. If no default address pool is specified
or the default address pool does not have assignable IP addresses, the address assignment fails.
You can specify only one default address pool in a DHCP policy. If you execute this command
multiple times, the most recent configuration takes effect.
Examples
# Specify DHCP address pool
pool1
as the default DHCP address pool in DHCP policy 1.
<Sysname> system-view
[Sysname] dhcp policy 1
[Sysname-dhcp-policy-1] default ip-pool pool1
Related commands
class ip-pool
dhcp policy
dhcp apply-policy
Use
dhcp apply-policy
to apply a DHCP policy to an interface.
Use
undo dhcp apply-policy
to restore the default.
Syntax
dhcp apply-policy
policy-name
undo dhcp apply-policy
Default
No DHCP policy is applied to an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
policy-name
: Specifies a DHCP policy by its name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
You can apply only one DHCP policy to an interface. If you execute this command multiple times, the
most recent configuration takes effect.
Summary of Contents for SOHO IE4300
