H3C SOHO IE4300, Command Reference Manual

Page: 1250 / 3296

49
network-operator
Parameters
process-id
: Specifies an OSPF process by its ID in the range of 1 to 65535. If you do not specify
this argument, the command displays retransmission queue information for all OSPF processes.
interface-type interface-number
: Specifies an interface by its type and number. If you do
not specify this argument, the command displays retransmission queue information for all interfaces.
neighbor-id
: Specifies a neighbor's router ID. If you do not specify this argument, the command
displays retransmission queue information for all neighbors.
Examples
# Display OSPF retransmission queue information.
<Sysname> display ospf retrans-queue
OSPF Process 100 with Router ID 192.168.1.59
Link State Retransmission List
The Router's Neighbor is Router ID 2.2.2.2 Address 10.1.1.2
Interface 10.1.1.1 Area 0.0.0.0
Retransmit list:
Type LinkState ID AdvRouter Sequence Age
Router 2.2.2.2 2.2.2.2 80000004 1
Network 12.18.0.1 2.2.2.2 80000003 1
Sum-Net 12.18.1.0 2.2.2.2 80000002 2
Table 29 Command output
Field Description
The Router's Neighbor is Router ID Neighbor router ID.
Address Neighbor interface IP address.
Interface Interface address of the router.
Area Area ID.
Retransmit list Retransmission list.
Type LSA type.
LinkState ID Link state ID.
AdvRouter Advertising router.
Sequence LSA sequence number.
Age LSA age.
display ospf routing
Use
display ospf routing
to display OSPF routing information.
Syntax
display ospf [ process-id ] routing [ ip-address { mask-length | mask } ]
[ interface interface-type interface-number ] [ nexthop nexthop-address ]
[ verbose ]