15
display ospfv3 abr-summary
Use
display
ospfv3
abr-summary
to display ABR summary route information.
Syntax
display
ospfv3
[
process-id
]
[
area
area-id
]
abr-summary
[
ipv6-address
prefix-length
]
[
verbose
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not
specify this argument, the command displays information about ABR summary routes for all OSPFv3
processes.
area
area-id
: Specifies an OSPFv3 area by its ID. The area ID is an IP address or a decimal
integer in the range of 0 to 4294967295 that is translated into the IP address format. If you do not
specify this option, the command displays information about ABR summary routes for all OSPFv3
areas.
ipv6-address prefix-length
: Specifies an IPv6 address. The
ipv6-address
argument
specifies an IPv6 prefix. The
prefix-length
argument specifies a prefix length in the range of 0
to 128. If you do not specify this argument, the command displays information about all summary
routes on the ABR.
verbose
: Displays detailed ABR summary route information. If you do not specify this keyword, the
command displays brief ABR summary route information.
Examples
# Display brief ABR summary route information in OSPFv3 process 1.
<Sysname> display ospfv3 1 abr-summary
OSPFv3 Process 1 with Router ID 2.2.2.2
Area: 1.1.1.1
Total summary addresses: 1
Prefix : 1000:4::/32
Status : Advertise
NULL0 : Active
Cost : 1 (Configured)
Routes count: 2
Table 3 Command output
Field
Description
Area
Area to which the summary routes belong.
Total summary addresses
Total number of summary routes.
Prefix
Prefix of the summary route.
Summary of Contents for SOHO IE4300
