H3C SOHO IE4300, Command Reference Manual

Page: 1470 / 3296

1
Routing policy commands
Common routing policy commands
apply cost
Use
apply cost
to set a cost for routes.
Use
undo apply cost
to restore the default.
Syntax
apply cost [ + | - ] cost-value
undo apply cost
Default
No cost is set for routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
+
: Increases a cost value.
-
: Decreases a cost value.
cost
-
value
: Specifies a cost in the range of 0 to 4294967295.
Examples
# Configure node 10 in permit mode for routing policy policy1 to set a cost of 120 for OSPF external
routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match route-type external-type1or2
[Sysname-route-policy-policy1-10] apply cost 120
apply cost-type
Use
apply cost-type
to set a cost type for routes.
Use
undo apply cost-type
to restore the default.
Syntax
apply cost-type { type-1 | type
-
2 }
undo apply cost-type
Default
No cost type is set for routes.