3
apply preference
Use
apply preference
to set a preference for a routing protocol.
Use
undo apply preference
to restore the default.
Syntax
apply preference
preference
undo apply preference
Default
No preference is set for a routing protocol.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
preference
: Specifies a preference in the range of 1 to 255.
Usage guidelines
If you have set preferences for routing protocols by using the
preference
command, the
apply
preference
command sets a new preference for the matching routing protocol. Unmatched
routing protocols still use the preferences set by using the
preference
command.
Examples
# Configure node 10 in
permit
mode for routing policy
policy1
to set the preference for OSPF
external routes to 90.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match route-type external-type1or2
[Sysname-route-policy-policy1-10] apply preference 90
apply prefix-priority
Use
apply prefix-priority
to set a prefix priority for routes.
Use
undo apply prefix-priority
to restore the default.
Syntax
apply prefix-priority
{
critical
|
high
|
medium
}
undo apply prefix-priority
Default
No prefix priority is set, which means the prefix priority is low.
Views
Routing policy node view
Predefined user roles
network-admin
Summary of Contents for SOHO IE4300
