H3C SOHO IE4300, Command Reference Manual

Page: 2580 / 3296

15
Usage guidelines
The value of the errored frame seconds event triggering threshold cannot be greater than the value
of the errored frame seconds event detection window (in seconds). Otherwise, errored frame
seconds events cannot be generated.
The configuration in interface view takes effect only on the specified interface. For an interface, the
configuration in interface view takes precedence.
Examples
# Set the errored frame seconds event detection window to 10000 milliseconds on GigabitEthernet
1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] oam errored-frame-seconds window 100
Related commands
display oam configuration
display oam link-event
oam errored-frame-seconds threshold
oam errored-frame-seconds period
oam errored-symbol-period threshold
Use
oam errored-symbol-period threshold
to set the errored symbol event triggering
threshold.
Use
undo oam errored-symbol-period threshold
to restore the default.
Syntax
oam errored-symbol-period threshold threshold-value
undo oam errored-symbol-period threshold
Default
An interface uses the global setting.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
threshold-value
: Specifies the errored symbol event triggering threshold in the range of 0 to
4294967295.
Usage guidelines
The configuration in interface view takes effect only on the specified interface. For an interface, the
configuration in interface view takes precedence.
Examples
# Set the errored symbol event triggering threshold to 100 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] oam errored-symbol-period threshold 100