3
Parameters
service-tag
: Sets the TPID value in the SVLAN tag.
hex-value
: Sets a hexadecimal TPID value in the range of 1 to ffff, excluding the reserved
EtherType values listed in
Table 1 Reserved EtherType values
Protocol type
Value
ARP
0x0806
PUP
0x0200
RARP
0x8035
IP
0x0800
IPv6
0x86dd
PPPoE
0x8863/0x8864
MPLS
0x8847/0x8848
IPX/SPX
0x8137
IS-IS
0x8000
LACP
0x8809
LLDP
0x88cc
802.1X
0x888e
802.1ag
0x8902
Cluster
0x88a7
Reserved
0xfffd/0xfffe/0xffff
Usage guidelines
A port without QinQ enabled uses the SVLAN TPID to match incoming tagged frames. The port
modifies the TPID in the SVLAN tag of outgoing frames as the configured value.
Examples
# Set the TPID value in SVLAN tags to 9100 (hexadecimal) on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qinq ethernet-type service-tag 9100
Related commands
qinq ethernet-type
(system view)
qinq ethernet-type (system view)
Use
qinq ethernet-type
to set the TPID value in CVLAN tags.
Use
undo qinq ethernet-type
to restore the default TPID value in CVLAN tags.
Syntax
qinq ethernet-type
customer-tag
hex-value
undo qinq ethernet-type
customer-tag
Summary of Contents for SOHO IE4300
