H3C SOHO IE4300, Command Reference Manual

Page: 2107 / 3296

10
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
server-name
: Specifies the Web authentication server name, a case-sensitive string of 1 to 32
characters.
User guidelines
Use this command to enable Web authentication on an interface and specify a Web authentication
server.
For Web authentication to operate correctly, do not enable port security or configure the port
security mode on the Layer 2 Ethernet interface enabled with Web authentication.
Examples
# Enable Web authentication and specify Web authentication server wbs on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] web-auth enable apply server wbs
Related commands
web-auth server
web-auth free-ip
Use
web-auth free-ip
to specify a Web authentication-free subnet.
Use
undo web-auth free-ip
to restore the default.
Syntax
web-auth free-ip ip-address { mask-length | mask }
undo web-auth free-ip { ip-address { mask-length | mask } | all }
Default
No Web-authentication-free subnets exist.
Views
System view
Predefined user roles
network-admin
Parameters
ip-address
: Specifies the Web authentication-free subnet address.
mask-length
: Specifies the mask length of the Web authentication-free subnet address, in the
range of 1 to 32.
mask : Specifies a mask for the Web authentication-free subnet in dotted decimal notation.
all
: Specifies all Web authentication-free subnets.