17
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance-name
: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of
1 to 31 characters. The VPN instance must already exist.
count
: Displays the total number of neighbor entries in the specified VPN instance.
Examples
# Display neighbor information about the VPN instance
vpn1
.
<Sysname> display ipv6 neighbors vpn-instance vpn1
Type: S-Static D-Dynamic O-Openflow R-Rule IS-Invalid static
IPv6 address MAC address VID Interface State T Aging
FE80::200:5EFF:FE32:B800 0000-5e32-b800 -- GE1/0/1 REACH IS --
Table 10 Command output
Field
Description
IPv6 address
IPv6 address of the neighbor.
MAC address
MAC address of the neighbor.
VID
ID of the VLAN to which the interface connected to the neighbor belongs. This field
displays hyphens (
--
) if the neighbor does not belong to a VLAN.
Interface
Interface connected to the neighbor.
State
State of the neighbor:
•
INCMP
—The address is being resolved. The link layer address of the
neighbor is unknown.
•
REACH
—The neighbor is reachable.
•
STALE
—Whether the neighbor is reachable is unknown. The device does not
verify the reachability any longer unless data is sent to the neighbor.
•
DELAY
—Whether the neighbor is reachable is unknown. The device sends an
NS message after a delay.
•
PROBE
—Whether the neighbor is reachable is unknown. The device sends
an NS message to verify the reachability of the neighbor.
Type
Neighbor information type:
•
Static
—Statically configured.
•
Dynamic
—Dynamically obtained.
•
Openflow
—Learned from the OpenFlow module.
•
Rule
—Learned from the IPoE or portal module.
•
Invalid static
—Invalid static configuration.
Aging
Reachable time of the neighbor:
•
For a static neighbor entry, this field displays hyphens (
--
), representing the
neighbor entry never expires.
•
For a dynamic neighbor entry, this field displays the elapsed time in seconds.
If the neighbor is never reachable, this field displays a pound sign (#).
Summary of Contents for SOHO IE4300
