50
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id
: Specifies an IPv6 VRRP group by its virtual router ID. The value range for
the
virtual-router-id
argument is 1 to 255.
Usage guidelines
You can use this command to temporarily disable an IPv6 VRRP group. After this command is
configured, the VRRP group stays in
Initialize
state, and its configurations remain unchanged. You
can change the configuration of the VRRP group, and your changes take effect when you enable the
VRRP group again.
Examples
# Disable IPv6 VRRP group 1.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp ipv6 vrid 1 shutdown
vrrp ipv6 vrid timer advertise
Use
vrrp ipv6 vrid timer advertise
to set the interval at which the master in an IPv6 VRRP
group sends VRRP advertisements.
Use
undo vrrp ipv6 vrid timer advertise
to restore the default.
Syntax
vrrp ipv6 vrid
virtual-router-id
timer advertise
adver-interval
undo vrrp ipv6 vrid
virtual-router-id
timer advertise
Default
The master in an IPv6 VRRP group sends VRRP advertisements at an interval of 100 centiseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id
: Specifies an IPv6 VRRP group by its virtual router ID. The value range for
the
virtual-router-id
argument is 1 to 255.
adver-interval
: Specifies an interval for the master in the specified IPv6 VRRP group to send
VRRP advertisements, in the range of 100 to 4095 centiseconds.
Usage guidelines
The master in an IPv6 VRRP group periodically sends VRRP advertisements to declare its presence.
You can use this command to set the interval at which the master sends VRRP advertisements.
As a best practice to maintain system stability, set the VRRP advertisement interval to be greater
than 100 centiseconds.
Summary of Contents for SOHO IE4300
