H3C SOHO IE4300 Command Reference Manual Download Page 202

Page: 202 / 3296

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

Use this command to verify that important settings have been saved to the configuration file for the
next system startup.

This command selects the configuration file to display in the following order:

If the main startup configuration file is available, this command displays the contents of the main
startup configuration file.

If only the backup startup configuration file is available, this command displays the contents of
the backup file.

If both the main and backup startup configuration files are not available, this command does not
display anything.

Examples

# Display the contents of the configuration file for the next system startup.

<Sysname> display saved-configuration

version 7.1.070, Release 1201

sysname Sysname

ftp server enable

telnet server enable

domain default enable system

vlan 1

domain system

---- More ----

Related commands

reset saved-configuration

save

display startup

Use

display startup

to display the names of the current startup configuration file and the

next-startup configuration files.

Syntax

display startup

Summary of Contents for SOHO IE4300

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SOHO IE4300

Reviews:

Related manuals for SOHO IE4300

Brands by name

Popular brands

H3C SOHO IE4300, Command Reference Manual

Search results

Summary of Contents for SOHO IE4300

Reviews:

Related manuals for SOHO IE4300

Brands by name

Popular brands